Brand Color Accuracy in Printing: RGB vs CMYK vs Pantone for Pouch Logos
Nothing damages a brand rollout faster than a logo that is the wrong shade. The reason most pouch logos drift is that the design is created in one colour space and printed in another. RGB, CMYK and Pantone each describe colour differently, and each breaks down in a different way when it moves to fabric. This guide explains the differences, which one to specify for a custom pouch, and how to keep a colour consistent from the design file to the finished bag.
RGB, CMYK and Pantone: what they actually are
RGB is an additive model for screens: red, green and blue light combine to make colour, and a monitor produces a bright, wide range that fabric ink simply cannot reproduce. CMYK is a subtractive model for printing: cyan, magenta, yellow and black inks are laid down as tiny dots to approximate a colour. Pantone is a spot-colour matching system: instead of layering four inks, each Pantone colour is a pre-mixed ink printed solid, which is why it is the standard for brand identity that must not shift.
When a logo is designed on screen it exists in RGB, and a screen shows far more colour than CMYK ink can hold. The moment you print RGB to a CMYK device, colours can shift. The Pantone Color Matching System exists precisely to remove that guesswork by giving every colour a reference number that any printer in any country can match.
Why screen colours and fabric colours disagree
Fabric printing is even less forgiving than paper. The ink absorbs into a textile surface that has its own colour, texture and sheen, so the same CMYK file can look distinctly different on a dark velvet and on a light cotton. Foil and metallic print change appearance completely under different lighting. This is why a brand that approves a screen mock-up and then sees a physical pouch often reports that the colour is “off”.
The practical fix is to print a physical colour swatch on the actual fabric before you commit to a run. This is part of the approval process in our customization workflow, where we lock the Pantone reference and print a pre-production sample for sign-off.
Which colour system should you specify?
For a brand logo with a single or two-colour print, specify a Pantone number. A spot colour stays consistent and is the only reliable way a factory can match a heritage brand colour. For a photographic or gradient design that needs many colours, CMYK or an all-over print is the practical route, with the understanding that exact shade matching is looser. If you are printing a small promotional run, a one-colour screen print in a Pantone reference is both the most accurate and the most cost-efficient.
When artwork moves to production, keep the logo as vector artwork and the Pantone number as the reference. A raster image at the wrong resolution is another common cause of a fuzzy or off-colour logo.
Registration and consistency across batches
Once a colour is chosen, the next risk is consistency between runs. Ink coverage, screen tension and temperature all affect the outcome, so a repeat order can drift from the first batch. Reputable factories hold a reference of the approved colour and measure samples across the run. This is exactly the process covered in our print registration and colour consistency guide, which explains how printers control ink.
For a multi-colour logo, registration matters as much as colour: if the screens do not line up, the colour edges separate. A full-colour alternative is UV printing, which is covered in our UV printing guide for smaller custom runs.
QA checks before you approve a sample
Check the approved sample under daylight, not under a warm desk lamp, because the light changes the perceived colour. Compare the printed pouch against the Pantone reference chip side by side. Confirm the print is opaque on the base colour and the screen lines are crisp with no bleed. Ask the factory how many samples they measured across the batch, and confirm the same Pantone reference will be used on repeat orders.
These checks are worth the few minutes they take, and they are the difference between a brand looking intentional versus looking off-brand. For the technical angle on how printing methods differ, our DTG versus screen printing article compares the two for small runs and full-colour designs.
Video: how to flood a screen for printing
Preguntas Frecuentes
Should I use RGB or CMYK for a pouch logo?
For a screen or brand reference, RGB is used for display; for print you should work in CMYK or specify a Pantone spot colour. A Pantone reference is the most accurate way to match a brand colour on fabric.
Why does my pouch logo colour look different from the design file?
Because a screen shows RGB light while ink prints in CMYK or a spot colour, and fabric adds its own texture and sheen. A physical colour swatch on the real fabric, plus a Pantone reference, is the way to close the gap.

